新闻中心

所有

2021年4月12日 , 新闻稿

A new campaign launched by Kanthal is focusing on the future of heating technology in the steel industry. The future is electric, the company says, and the shift from fossil fuels enables steel producers to achieve precise temperature control while significantly reducing CO2 emissions and energy consumption.

2021年4月11日 , 专题报告

For heating steel ingots, fiber insulation and electric heating combine to give good temperature control and little energy loss at Kanthal’s steel plant in Hallstahammar, Sweden.

2021年4月11日 , 专题报告

At its wire hot rolling mill in Hallstahammar, Sweden, Kanthal’s electric walking beam furnace provides clean, efficient and reliable heating.

2021年4月11日 , 专题报告

Electric heating has transformed the furnaces of a venerable European producer of engineering steel.

2021年4月9日 , 专题报告

Even after more than 25 years of operation, Kanthal’s pit furnace is clean, quiet and offers excellent temperature precision – thanks to its use of electric heating.

2021年4月9日 , 专题报告

Kanthal can not only provide a broad range of electric heating solutions but can also support its customers globally through the transition.

2021年4月9日 , 专题报告

If you are thinking about making the switch from gas to electric heating, you need to know all the facts. Here we debunk some of the popular myths associated with electric heating solutions to help you make an informed decision.

2021年4月9日 , 专题报告

Electric heating in industrial processes is central to meet ambitious climate targets set globally. Key to success is increased access to green power.

2021年4月9日 , 专题报告

Knowledge is the key to expanding the electrification of Swedish steel, says Helena Malmqvist at the Swedish Steel Producers’ Association.

2021年3月15日 , 专题报告

The growth of additive manufacturing is creating new challenges in the field of heat treatment technology and prompting a shift toward electrification and greater flexibility from heat treatment equipment. These changes are expected to affect heat treatment in other industries too.

新闻

2021年1月1日 , 新闻

Sandvik Thermal Process to rebrand its product portfolio as Kanthal® as of January 1, 2021. This change aims to further strengthen our product offer, customer service, brand and technology. Kanthal® is a world leading brand for products and services in industrial heating technology and resistance materials.

2021年1月1日 , 新闻

On January 1, 2018 Kanthal acquired privately owned Custom Electric Manufacturing Co., headquartered in Wixom, Michigan, USA. The company is a leading manufacturer of original equipment and replacement heating elements in North America.

2020年4月29日 , 新闻

A service solution that helps customers reduce their CO2 emission by converting from fossil gas furnaces to electrical furnaces led to the award of the "The Sandvik Sustainability Award in Memory of Sigrid Göransson” to Daniel Burton, Marcus Andersson and Ole Stadum at Kanthal. The winner was presented online in conjunction with Sandvik’s 2020 Annual General Meeting.

2020年1月6日 , 新闻

Kanthal acquires privately owned Thermaltek Inc., headquartered in North Carolina, USA. The company designs, manufactures, and services high-temperature furnaces and heating elements, specialized for the molten metals, glass and ceramics industries.

2019年10月25日 , 新闻

The steel and cement industries are striving to reduce their CO2 emissions by converting to fossil-free operations. Efficient electrical heating processes are enablers for this development. The Swedish innovator, NyCast AB, wins the Kanthal® Award 2019 for their heating innovation that has the potential to contribute to an industrial future without greenhouse gas emissions.

2019年10月15日 , 新闻

With the help of the latest chatbot technology, Kanthal has taken a new approach to the once drawn-out process in an effort to get you the answers you deserve.

2019年9月30日 , 新闻

今天是国际妇女节。今年的主题是 #BalanceforBetter# 并提倡男女平等,这在第一次举办国际妇女节的 1910 年是绝对离谱的事。此后我们已经取得了很大进展,但仍需要不懈奋斗。

2019年9月30日 , 新闻

随着世界向着更环保、更可持续的未来发展,越来越多的加热工艺将会向电加热转变。这是 Kanthal® Services 业务经理 Daniel Burton 在 CastExpo 2019 博览会上的报告中所传达的消息。

2018年11月27日 , 新闻

Kanthal is introducing a new chat functionality aiming at opening a new channel of communication with our website visitors.

2018年11月15日 , 新闻

Congratulations to Bharat Energy Storage Technology (BEST), winner of Kanthal® Award 2018. The Indian start-up company was awarded for their pioneering work in sustainable energy technologies.

新闻稿

2021年4月12日 , 新闻稿

A new campaign launched by Kanthal is focusing on the future of heating technology in the steel industry. The future is electric, the company says, and the shift from fossil fuels enables steel producers to achieve precise temperature control while significantly reducing CO2 emissions and energy consumption.

2021年3月10日 , 新闻稿

Swedish heating technology company Kanthal and metals research institute Swerim will invest in an ultra-modern atomizing equipment. The investment, worth 2 MEUR, will help Sweden maintain its world-leading position in the area of powder metallurgy.

2020年10月28日 , 新闻稿

Kanthal is adding a 60 kW heater to its range of flow heaters to meet demands for higher power in industries like aluminum and glass.

2020年9月23日 , 新闻稿

Custom Electric Manufacturing was acquired by Sweden-based Kanthal in 2018 and will now go to market under the Kanthal brand. The transition will be effective as of January 1, 2021.

2020年6月9日 , 新闻稿

Kanthal will replace the motor and drive line in its blooming mill in Hallstahammar, Sweden, an investment of 50 MSEK. The new system will be up and running by mid-2021.

2020年5月20日 , 新闻稿

极速披萨背后隐藏诸多秘密,但先进的加热技术无疑是最重要的因素之一。瑞典工业加热技术公司 Kanthal 的工程师利用电加热技术,设法将传统那不勒斯披萨的烘烤时间从 90 秒缩短到了 37 秒。

2020年3月20日 , 新闻稿

We are here for you. And we want you to know that we are doing our utmost to safeguard your orders, while protecting our people and operations.

2020年1月29日 , 新闻稿

The Swedish Energy Agency has granted a project that will evaluate the potential of replacing gas-fired furnaces with electrically heated furnaces for material heating. The goal is to reduce CO2 emissions through better energy efficiency and reduced loss of material.

2019年10月31日 , 新闻稿

作为全球电加热和高温应用领域的技术领导者,Kanthal 推出了增材制造服务,这将颠覆传统的加热元件和组件设计。 与专为 3D 打印而开发的新型铁铬铝 (FeCrAl) 合金 Kanthal® AM100 一起,这种名为 Kanthal® 增材制造的新服务为加热行业提供了革命性的解决方案。

2019年9月30日 , 新闻稿

位于瑞典哈尔斯塔哈马的 Kanthal 分析化学实验室获得了其第一个 ISO 17025 认证 - 材料可追溯性、工作例行步骤和质量保证更上一层楼。

专题报告

2021年4月11日 , 专题报告

For heating steel ingots, fiber insulation and electric heating combine to give good temperature control and little energy loss at Kanthal’s steel plant in Hallstahammar, Sweden.

2021年4月11日 , 专题报告

At its wire hot rolling mill in Hallstahammar, Sweden, Kanthal’s electric walking beam furnace provides clean, efficient and reliable heating.

2021年4月11日 , 专题报告

Electric heating has transformed the furnaces of a venerable European producer of engineering steel.

2021年4月9日 , 专题报告

Even after more than 25 years of operation, Kanthal’s pit furnace is clean, quiet and offers excellent temperature precision – thanks to its use of electric heating.

2021年4月9日 , 专题报告

Kanthal can not only provide a broad range of electric heating solutions but can also support its customers globally through the transition.

2021年4月9日 , 专题报告

If you are thinking about making the switch from gas to electric heating, you need to know all the facts. Here we debunk some of the popular myths associated with electric heating solutions to help you make an informed decision.

2021年4月9日 , 专题报告

Electric heating in industrial processes is central to meet ambitious climate targets set globally. Key to success is increased access to green power.

2021年4月9日 , 专题报告

Knowledge is the key to expanding the electrification of Swedish steel, says Helena Malmqvist at the Swedish Steel Producers’ Association.

2021年3月15日 , 专题报告

The growth of additive manufacturing is creating new challenges in the field of heat treatment technology and prompting a shift toward electrification and greater flexibility from heat treatment equipment. These changes are expected to affect heat treatment in other industries too.

2020年11月17日 , 专题报告

After making a number of custom-made modifications to its Globar® SiC heating elements, Kanthal was able to help Toyota Motor Manufacturing Poland increase the lifespan of its elements to an average of two years from seven months.